绳带的机型辨别方法 Method for identifying the model of rope straps

发布时间 Release time: 2023-11-29


  圆绳都是双锭机所生产的,扁带都是单锭机生产的,子母带都是专 用子母机46锭生产的,所以在判别该产品的机型时,先要清楚它是属于那一类别。简单的判别方法:数一数产品单面同一水平线上同一方向的纱线条数,如果是圆绳用所数的纱线条数*8等于机型的锭数,如果是扁带用所数的纱线条数*4

  1等于机型的锭数,对于一些特别的产品不使用。对于子母带判别一般都是46锭生产,当然这里大家要同无梭机生产的子母带区别开,区别在于无梭机生产的子母带有经纬纱锤子交织而成,纬纱可以拉出来,而绳带机生产的子母带只有经纱交叉编制而成。

Round ropes are all produced by double spindle machines, flat belts are all produced by single spindle machines, and both primary and secondary belts are produced by dedicated primary and secondary machines with 46 spindles. Therefore, when determining the model of this product, it is important to first clarify which category it belongs to. Simple discrimination method: Count the number of yarns on one side, on the same horizontal line, and in the same direction of the product. If it is a round rope, the number of yarns counted is 8, which is equal to the number of spindles in the model. If it is a flat belt, the number of yarns counted is 4

1 is equal to the number of ingots in the model, and is not used for some special products. For the discrimination of mother and child belts, it is generally produced on 46 spindles. Of course, here we need to distinguish it from the mother and child belts produced on a shuttle less machine. The difference is that the mother and child belts produced on a shuttle less machine are interwoven with warp and weft yarn hammers, and the weft yarn can be pulled out, while the mother and child belts produced on a rope machine are only interwoven with warp yarn.

关键词: